Model: Teltonika RUTX09
INDUSTRIAL CELLULAR ROUTER
Features
- RUTX09 is LTE-A Cat 6 cellular IoT router with Dual-SIM, Carrier Aggregation, and 4 Gigabit Ethernet interfaces.
- RUTX09 is designed as a Main/Backup internet source offering cellular speeds up to 300 Mbps, where steady connection and high data throughput is necessary.
- It has plenty of processing capacity for custom applications on the OpenWrt based RutOS system.
- Plenty of security features are available, like Firewall, VPN, IPsec, SNMP, Content Filtering for maximized safety.
- This product is compatible with our Remote Management System for convenient monitoring, maintenance, and data collection.
Standard Package Contains
- Router RUTX09
- 18 W PSU
- 2 x LTE antennas (swivel, SMA male)
- 1 x GNSS antenna (adhesive, SMA male, 3 m cable)
- SIM Adapter kit
- Ethernet cable (1.5 m)
- QSG (Quick Start Guide)
- RMS Flyer
- Packaging box
Specifications
MOBILE
- Mobile module: 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
- SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail
- Status: Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID
- SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply
- USSD: Supports sending and reading Unstructured Supplementary Service Data messages
- Black/White list: Operator black/white list
- Multiple PDN: Possibility to use different PDNs for multiple network access and services
- Band management: Band lock, Used band status display
- APN: Auto APN
- Bridge mode: Direct connection (bridge) between mobile ISP and device on LAN
ETHERNET
- WAN: 1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
- LAN: 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
NETWORK
- Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
- Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL)
- VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection monitoring: Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
- Firewall: Port forwards, traffic rules, custom rules
- DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd
- QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port
- DDNS: Supported >25 service providers, others can be configured manually
- Network backup: VRRP, Mobile and Wired WAN options, each of which can be used as an automatic Failover
- Load balancing: Balance Internet traffic over multiple WAN connections
- Hospot: Internal/external Radius server, captive portal, built in customizable landing page
- SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)
SECURITY
- Authetication: Pre-shared key, digital certificates, X.509 certificates
- Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
- Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- VLAN: Port and tag based VLAN separation
- Mobile quota control: Custom data limits for both SIM cards
- WEB filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
- Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
- OpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methods
- OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
- IPsec: IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
- GRE: GRE tunnel
- PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3 support
- Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
- DMVPN: Method of building scalable IPsec VPNs
- SSTP: SSTP client instance support
- ZeroTier: ZeroTier VPN client support
- WireGuard: WireGuard VPN client and server support
MODBUS
MODBUS TCP SLAVE
- ID filtering: Respond to one ID in range [1;255] or any
- Allow remote access: Allow access through WAN
- Custom registers: Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
MODBUS TCP MASTER
- Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
- Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT GATEWAY
- Gateway: Allows sending commands and receiving data from Modbus Master trough MQTT broker
DATA TO SERVER
- Protocols: HTTP(S), MQTT, Azure MQTT, Kinesis
MONITORING & MANAGEMENT
- WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
- FOTA: Firmware update from server, automatic notification
- SSH: SSH (v1, v2)
- SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS autoreply
- Call: Reboot, Status, Mobile data on/off, Output on/off
- TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
- MQTT: MQTT Broker, MQTT publisher
- SNMP: SNMP (v1, v2, v3), SNMP trap
- JSON-RPC: Management API over HTTP/HTTPS
- Modbus: Modbus TCP status/control
- RMS: Teltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
- CPU: Quad-core ARM Cortex A7, 717 MHz
- RAM: 256 MB, DDR3
- FLASH storage: 256 MB, SPI Flash
FIRMWARE / CONFIGURATION
- WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
- FOTA: Update FW/configuration from server
- RMS: Update FW/configuration for multiple devices at once
- Keep settings: Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
- Operating system: RutOS (OpenWrt based Linux OS)
- Supported languages: Busybox shell, Lua, C, C++
- Development tools: SDK package with build environment provided
LOCATION TRACKING
- GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
- Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
- NMEA: NMEA 0183
- Server software: Supported server software: TAVL, RMS
- Mobile Network Geolocation: Get approximate device location on RMS based on mobile cell tower position (without using GPS)
- Geofencing: Configurable multiple geofence zones
USB
- Data rate: USB 2.0
- Applications: Samba share, USB-to-serial
- External devices: Possibility to connect external HDD, flash drive, additional modem, printer
- Storage formats: FAT, FAT32, NTFS
- INPUT/OUTPUT
- Input: 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
- Output: 1 x Digital Output, Open collector output, max output 30 V, 300 mA
- Events: SMS, Email, RMS
POWER
- Connector: 4 pin industrial DC power socket
- Input voltage range: 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
- PoE (passive): Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af, 802.3at and 802.3bt standards
- Power consumption: 9 W Max
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
- Ethernet: 4 x RJ45 ports, 10/100/1000 Mbps
- I/Os: 1 x Digital Input, 1 x Digital Output on 4 pin power connector
- Status LEDs: 3 x WAN type, 2 x Mobile connection type, 5 x Mobile connection strength, 8 x LAN status, 3 x WAN status, 1x Power
- SIM: 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
- Power: 1 x 4 pin DC connector
- Antennas: 2 x SMA for LTE, 1 x SMA for GNNS
- USB: 1 x USB A port for external devices
- Reset: Reboot/User default reset/Factory reset button
- Other: 1 x Grounding screw
PHYSICAL SPECIFICATION
- Casing material: Aluminium housing with DIN rail mounting option
- Dimensions (W x H x D): 115 x 44.2 x 95.1 mm
- Weight: 455 g
- Mounting options: DIN rail, flat surface placement
OPERATING ENVIRONMENT
- Operating temperature: -40 C to 75 C
- Operating humidity: 10 % to 90 % non-condensing
- Ingress Protection Rating: IP30
REGULATORY & TYPE APPROVALS
- Regulatory: CE/RED, EAC, RoHS, WEEE
EMI IMMUNITY
- Standards: Draft EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0
- EN61000-4-2:2009: ESD
- RS: EN 61000-4-3:2006 + A1:2008 + A2:2010
- EFT: EN 61000-4-4:2012
- Surge protection: EN 61000-4-5:2014
- CS: EN 61000-4-6:2014
- DIP: EN 61000-4-11:2014
RF
- Standards: EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.2, EN303 413 V1.1.1
SAFETY
- Standards: IEC 62368-1:2014, EN 62368-1:2014 + A11:2017
- EN 50665:2017, EN 62311:2008