External SSD/HDD Docking Station | USB 3.2 Gen 1 (5 Gbps) to SATA III and IDEThe UNIDOCKU33 USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray.Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details.The slot-loading design holds the SATA and IDE drives upright inside the docks, neatly keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables.A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives).The UNIDOCKU33 is backed by a StarTech.com 2-year warranty and free lifetime technical support.Improved Performance with UASPUASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.At the same peak in testing UASP also shows an 80% reduction in required processor resources.Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.The StarTech.com Advantage
Technical details
Sustainability certificates
RoHS
Hard drive
Storage media type
HDD, SSD
Storage drive interface
Parallel ATA (IDE), Serial ATA, Serial ATA II, Serial ATA III
Storage drive sizes supported
2.5,3.5"
Number of storage drives supported
2
Maximum storage capacity
6 TB
Ports & interfaces
Host interface
USB 3.2 Gen 1 (3.1 Gen 1) Type-B
USB 3.2 Gen 1 (3.1 Gen 1) ports quantity
1
DC-in jack
Y
Weight & dimensions
Width
130 mm
Depth
147 mm
Height
70 mm
Weight
500 g
Power
AC input voltage
110-240 V
Input current
1.3 A
Output voltage
12 V
Output current
3 A
Power plug type
Type M
Operational conditions
Operating temperature (T-T)
5 - 80 °C
Storage temperature (T-T)
-40 - 70 °C
Operating relative humidity (H-H)
8 - 90%
Packaging data
Package width
123 mm
Package depth
187 mm
Package height
214 mm
Package weight
1 kg
Packaging content
AC adapter included
Y
Cables included
USB
Manual
Y
Cooling
Built-in fan
N
Features
Maximum data transfer rate
5 Gbit/s
Product colour
Black
Material
Plastic
Hot-swap
Y
Plug and Play
Y
RAID support
N
LED indicators
Activity, Power
Mean time between failures (MTBF)
30000 h
UASP support
Y
Chipset
JMicron - JMS561U, JMD330
Certification
CE, FCC
Logistics data
Harmonized System (HS) code
84733080
Master (outer) case width
210 mm
Master (outer) case length
625 mm
Master (outer) case height
450 mm
Products per master (outer) case
10 pc(s)
Order before 4 pm = delivered tomorrow at home or pick up today in the store until 6.30 pm*
*: the delivery times are indications & depend on suppliers and transport companies