E3 Performance UPSs are dedicated to the electrical protection of IT networks and environments. With high-quality sinusoidal current output and variety of connectors, they are ideal for supplying power to sensitive devices.

Features

High-performance protection

Equipped with microprocessor-controlled On Line Performance technology, the E3 Performance range offers perfect protection to IT networks and loads. It supplies sinewave current, and its high output power factor (0.9) provides appropriate protection to servers and other IT equipment. The E3 Performance UPS guarantees uninterrupted service and the safeguarding of data in the event of a power cut.

Advantages to suit every situation

E3 Performance UPSs are highly adaptable thanks to their many connectors:

8 to 9 protected outlets, of which 4 are programmable (according to model). With the programmable outlets, strategic loads and non-critical loads can be controlled easily and independently.
2 RJ45 connectors also provide protection for the Tel/ADSL line.
RS232 and USB communication ports allow remote communication with the various devices connected.

The flexible design of the E3 Performance allows for simplified installation according to user requirements:

tower position
rack position

Power factor of 0.9

Optimum output power factor 0.9
High level of performance
High efficiency for critical applications

Versatile rack/tower format

Two-in-one design for simplified installation
2U rack format for easy installation in a 19" server bay (mounting brackets included)
Tower format (base included)

Communication

In addition to their variety of connectors, E3 Performance UPSs have:

Local controle capabilities with InfoPower software (supplied as standard) :
- - Automatic file closure in the absence of mains power: saving the data of all the computers in a network
  - Intuitive graphic interface: displays system status, the various measurements, event history, etc.
Network control capabilities via SNMP I Pro agent (available as an option) :
- - An SNMP slot is provided for connection of an optional SNMP agent and use of the associated software to control the UPS remotely from the network.

User-friendly LCD display

Precision and user-friendliness: status and parameter values given in real time
Rotating LCD screen that adapts to tower configuration
Intuitive display on front panel: direct access to UPS configuration for easier modification of operational modes

Specifications

GENERAL CHARACTERISTICS

Technology: On Line Performance controlled by microprocessor
Power: 800 VA / 720 W
IEC standard/programmable outlets: 4/4 (10A)
Tel. / ADSL line protection: RJ45 (1-in/1-out)

PROTECTION & FILERING

Output form: Pure sinusoidal form
Protection: Discharge / overload / overvoltage + Tel./ADSL line
Input protection: Circuit breaker

PHYSICAL CHARACTERISTICS

Dimensions DxWxH: 425x438x88mm (2U)
Net weight: 12,9 kg

TECHNICAL INPUT CHARACTERISTICS

Voltage: 208/220/230/240 VAC
Frequency range (batt mode): 81-152 VAC
Frequency: 60/50 Hz (autodetection)

TECHNICAL OUTPUT CHARACTERISTICS

Voltage: 110-115/120/127 VAC
AC voltage regulation (Batt mode): +/- 1.5% (before battery alarm)
Frequency range: 50 Hz or 60 +/- 1 Hz
Crest factor: 3:1
Harmonic distorsion: 2% max. @ 100% linear load; 5% max. @ 100% non-linear load (before low battery alarm)

OUTPUT

ECO mode: 97%
Boost & Buck mode: 95%
Battery mode: 89%

BATTERY

Max. load current: 1.5 A
Charge voltage: 27.4 VDC ± 1%
Recharge time: 90% in 4 hours after a total discharge
Backup time: From 5 to 30 minutes depending on the connected load

BATTERY CABINETS FOR EXTENDED BACKUP TIME (OPTION)

Backup time: For extended backup time up to 30 minutes**
Dimensions - LxWxH: 440x515x88 (2U)
Net weight: 19.1 kg

INDICATORS & ALARMS

LCD screen: Mains power supply mode, battery mode, charge level, battery level, input voltage, output voltage, overload, low battery and battery fault
Alarms: Battery mode, low batteries, overload, fault

COMMUNICATIONS

Communication ports: USB / RS232
Communication software: InfoPower (compatible with Windows 2000/2003/XP/2008, Windows 7, 8, 10, Linux, Unix and MAC)
SNMP I Pro (option): Power management from SNMP (VMware, Hyper V compatible) and from an internet browser

ENVIRONMENT

Ideal environment: 0-40°C, 0-90% relative humidity (without condensation)
Noise level: < 45 dB

STANDARDS

Standard (HV): CE RoHS
EMC (electromagnetic compatibility): EN62040-2: 2006+AC: 2006 (EN 61000-3-2: 2014, EN61000-4-2:2009, EN61000-4-3:2006+A2: 2010, EN61000-4-4: 2012, EN61000-4-5:
2006, EN61000-4-6: 2014, EN61000-4-8: 2010, EN61000 -2-2: 2002)
Low voltage (safety): EN62040-1:2008+A1:2013

COMMERCIAL INFORMATION