Model: Teltonika TRB255
INDUSTRIAL M2M GATEWAY
Features
- TRB255 can be used to integrate modern and legacy industrial equipment into one solution via RS232, RS485 & Ethernet interfaces.
- This industrial LTE Cat M1 & NB-IoT gateway is backward compatible to EGPRS (2G) networks.
It can still be used with 2G network, however in case it gets shut down, there is a possibility to switch to LPWAN connectivity options.
- TRB255 has a wide range of industrial and networking features such as Modbus, SMS control, Firewall, OpenVPN and more.
- This product is compatible with the Teltonika Networks Remote Management System (RMS).
Specifications
MOBILE
- Mobile module: LTE (Cat M1) / NB-IoT / EGPRS
- SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, on roaming, no network, network denied, data connection fail
- Status: Signal strength, Connected band, SINR, RSRP, RSRQ, Bytes sent/received
- Bridge: Direct connection (bridge) between mobile ISP and device on LAN
- SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS (planned), SMS autoreply
- USSD: Supports sending and reading Unstructured Supplementary Service Data messages
- Black/White list (planned): Operator black/white list
- Multiple PDN: Possibility to use different PDNs for multiple network access and services
- Band management: Used band status display, Band lock (planned)
- APN: Auto APN
ETHERNET
- LAN: 1 x LAN port 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover (Configurable to work as WAN port)
NETWORK
- Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) (planned)
- Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, PPP, SSH, DHCP, Telnet, MQTT, Wake On Lan (WOL)
- VoIP passthrough support (planned): H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection monitoring: Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
- Firewall: Port forward, traffic rules, custom rules
- DHCP: Static and dynamic IP allocation, DHCP Relay
- QoS / Smart Queue Management (SQM) (planned): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
- DDNS: Supported >25 service providers, others can be configured manually
- SSHFS (planned): Possibility to mount remote file system via SSH protocol
SECURITY
- Authentication: Pre-shared key, digital certificates, X.509 certificates
- Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
- Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- VLAN (planned): Tag based VLAN separation
- Mobile quota control: Custom data limits for both SIM cards
- WEB filter (planned): Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
- Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
- OpenVPN: Multiple clients and server can be running simultaneously, 12 encryption methods
- OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
- IPSec: IKEv1, IKEv2, with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
- GRE: GRE tunnel
- Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
- PPTP, L2TP: Client/Server services can run simultaneously, L2TPv3 support
- DMVPN: Method of building scalable IPsec VPNs
- SSTP: SSTP client instance support
- ZeroTier: ZeroTier VPN client support
SERIAL COMMMUNICATION MODES
- Modes: Console, OverIP, Modem (planned), Modbus RTU master, Modbus gateway, NTRIP client (planned)
MODBUS
MODBUS TCP SLAVE
- ID filtering: Respond to one ID in range [1;255] or any
- Allow remote access: Allow access through WAN
- Custom registers: Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
MODBUS TCP MASTER
- Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
- Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MODBUS RTU MASTER
- Supported baud rates: From 300 to 3000000
- Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
- Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
- Number of data bits: 7 or 8
- Number of stop bits: 1 or 2
- Parity bits: None, Even, Odd
- Flow control: None, RTS/CTS (only for RS232 interface), Xon/Xoff
MQTT GATEWAY
- Gateway: Allows sending commands and receiving data from Modbus Master trough MQTT broker
DATA TO SERVER
- Protocols: HTTP(S), MQTT, Azure MQTT, Kinesis
MONITORING & MANAGEMENT
- WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
- FOTA: Firmware update from server, automatic notification
- SSH: SSH (v1, v2)
- SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
- TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
- MQTT: MQTT Broker, MQTT publisher
- SNMP: SNMP (v1, v2, v3), SNMP Trap
- JSON-RPC: Management API over HTTP/HTTPS
- Modbus: Modbus TCP status/control
- RMS: Teltonika Remote Management Systems (RMS)
IoT PLATFORMS
- Cloud of Things: Allows monitoring of: Device data, Mobile data, Network info, Availability
- ThingWorx: Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
- Cumulocity: Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
- Azure IoT Hub: Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID,
Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID,
Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
SYSTEM CHARACTERISTICS
- CPU: Qualcomm QCA9531, MIPS 24kc, 650 MHz
- RAM: 64 MB, DDR2
- Flash storage: 16MB SPI Flash (4 MB available for user)
FIRMWARE / CONFIGURATION
- WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
- FOTA: Update FW/configuration from server
- RMS: Update FW/configuration for multiple devices
- Keep settings: Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
- Operating system: RutOS (OpenWrt based Linux OS)
- Supported languages: Busybox shell, Lua, C, C++
- Development tools: SDK package with build environment provided
LOCATION TRACKING
- GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
- Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
- NMEA: NMEA 0183
- NTRIP (planned): NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
- Server software: Supported server software TAVL, RMS
- Mobile Network Geolocating: Location without using GPS, get approximate location based on mobile tower on RMS
- Geofencing: Configurable multiple geofence zones
INPUT/OUTPUT
- Configurable I/O: 3 x Configurable Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA
- Analog input: 1 x Analog input (0 - 30 V)
- Events: SMS, Email
- Output control: HTTP POST/GET, Schedule
- I/O juggler: Allows to set certain I/O conditions to initiate event
SERIAL
- RS232: Terminal block connector: TX, RX, RTS, CTS
- RS485: Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface)
- Supported baud rates: From 300 to 3000000
- Number of data bits: 7 or 8
- Number of stop bits: 1 or 2
- Parity: None, Even, Odd
- Flow control: None, RTS/CTS (only for RS232 interface), Xon/Xoff
POWER
- Connector: 2 pins in 16 pin industrial terminal block
- Input voltage range: 9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs max
- Power consumption: Idle: <1.2 W, Max: <5 W
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTON, SIM)
- Ethernet: 1 x RJ45 port, 10/100 Mbps
- I/O’s: 3 x Configurable I/O, 1 x Analog input in 16 pin terminal block
- Status LEDs: 3 x connection status LEDs, 3 x connection strength LEDs, 1 x power LED, 1 x Eth port status LED
- SIM: 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM tray
- Power: 2 pins in 16 pin terminal block
- Antennas: 1 x SMA connector for Mobile, 1 x SMA connector for GNSS
- RS232: 4 pins in 16 pin terminal block (TX, RX, RTS, CTS)
- RS485: 4 pins in 16 pin terminal block (D+, D-, R+, R-)
- Reset: Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
- Casing material: Aluminium housing with DIN rail mounting option
- Dimensions (W x H x D): 83 x 25 x 74.2 mm
- Weight: 165 g
- Mounting options: DIN rail, wall mounting (additional kits needed), flat surface placement
OPERATING ENVIRONMENT
- Operating temperature: -40 ? to 75 ?
- Operating humidity: 10% to 90% non-condensing