PRODUCT FEATURES

Physical Port

• 5-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE Injector (Port 1 to Port 4)
• RJ45 type interface for basic management and setup
• USB type A female for setting file backup and restore

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
• Backward compatible with IEEE 802.3af Power over Ethernet
• Up to 4 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 30 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE management:
• Total PoE power budget control
• Per port PoE function enable/disable
• PoE port power feeding priority
• Per PoE port power limitation
• PD alive-check
• PoE schedule

Battery Management

• Battery type option: Nickel-cadmium battery or lead-acid battery
• Easy diagnostic of the system operating status via LED indicator
• Battery current usage and status
• Battery capacity and power consumption statistics
• Low voltage cut-off protection: Send alert and cut off the low priority PoE port for the low power battery
• Pulse Width Modulation (PWM) Protection:
• Reverse current protection to prevent the current circuits from flowing back to the PV panel
• Over-current and over-temperature protection
• Reverse polarity protection (for battery and charging electrodes)

Industrial Case & Installation

• IP30 aluminum case
• DIN-rail and wall-mounted design
• Supports -10 to 60 degrees C operating temperature
• Supports ESD 6KV DC Ethernet protection
• Redundant power design:
• 48V~56V DC wide power input

Switching

• Hardware based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• 8K MAC address table size
• Automatic address learning and address aging

Router

• Internet types: Dynamic IP, static IP, PPPoE, L2TP, PPTP
• Static and dynamic (RIP1 and 2) routing
• IP/MAC-based bandwidth control
• Supports Port Forwarding, DMZ, UPnP and Dynamic DNS for various networking applications
• 802.1d STP and  IGMP Proxy

Security

• Port filtering lets you either allow or prevent which applications can access the Internet.
• MAC filtering allows you to include or exclude computers and devices based on their MAC address
• URL filtering allows you to control access to Internet websites in an URL list
• IP source guard prevents IP spoofing attacks
• DoS attack prevention

Management

• Switch Management Interface
• IPv4 Web switch management
• SNMP v1, v2c
• Static and DHCP for IP address assignment
• System Maintenance
• Firmware upload/download via HTTP
• Configuration upload/download through HTTP
• Hardware reset button for system reboot or reset to factory default
• NTP Network Time Protocol
• SNMP trap for interface Link Up and Link Down notification
• Event message logging to remote syslog server
• PLANET Smart Discovery Utility

PRODUCT SPECIFICATIONS

Main Components

• Web Server Controller: Realtek 8198 x 1
• CPU: RLX5281/500MHz x 1
• Flash: 4MBytes x 1
• SDRAM: 64Mbytes x 1
• PoE Chip: PD69104B x 1

Hardware Specifications

• Copper Ports:
• LAN: 5 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 1 to Port 5, bridge mode)
• WAN: 1 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 5, gateway mode)
• PoE Injector Port:
• 4 ports with 802.3af/802.3at PoE injector function (Port 1 to Port 4)
• USB:
• 1 USB Type A female for setting backup
• Power Output:
• 4 PoE out 51VDC; max. 30 watts per PoE port
• 2 DC out 24@ 1A maximum (four-pin terminal block)
• The voltage of DC out is based on the battery.
• Switch Architecture: 
• Store-and-Forward
• Switch Fabric: 
• 10Gbps/non-blocking
• Switch Throughput@64 bytes: 
• 5.95Mpps@64 bytes
• MAC Address Table: 
• 8K entries
• Shared Data Buffer: 
• 512Kbit
• Flow Control: 
• IEEE 802.3x pause frame for full-duplex
• Back pressure for half-duplex
• Reset Button:
• < 5 sec: System reboot
• > 5 sec: Factory default
• LED:
• 3 LEDs for System and Power:
• Green: Power
• Green: Fault
• Green: System
• 4 LEDs for PoE Copper Ports (Port 1~Port 4):
• Green: LNK/ACT
• Orange: PoE-in-use
• 1 LED for 10/100/1000T Copper Port (Port 5):
• Green: LNK/AC
• 3 LEDs for PoE Power Usage (W)
• Green: 50, 100 and 120W
• Connector:
• Removable 6-pin terminal block
• Pin 1/2 for PV panel; Pin 3/4 for alarm; Pin 5/6 for battery
• Alarm:
• 1 Digital Output (DO):
• Level 0: -24V~2.1V (±0.1V)
• Level 1: 2.1V~24V (±0.1V)
• Open collector to 24V DC, 100mA max.
• Power Requirements:
• PV in: 24~45V DC
• Battery in/out: 24V DC
• Power Consumption/ Dissipation:
• 5.04 watts, 17.1BTU (Standby without PoE function)
• 6.96 watts, 23.7 BTU (Full loading without PoE function)
• 135.36 watts, 461.5 BTU (Full loading with PoE function)
• Dimensions (W x D x H): 
• 84 x 107 x 152 mm
• Weight: 
• 1026g
• ESD Protection: 
• 6KV DC
• Enclosure: 
• IP30 aluminum case
• Installation: 
• DIN-rail kit and wall-mount ear

Power over Ethernet

• PoE Standard: 
• IEEE 802.3af/802.3at Power over Ethernet PSE
• PoE Power Supply Type: 
• End-span
• PoE Power Output:
• Per port 51V DC, 275mA. Max. 15.4 watts (IEEE 802.3af)
• Per port 51V DC, 535mA. Max. 30 watts (IEEE 802.3at)
• Power Pin Assignment: 
• 1/2 (+), 3/6 (-)
• PoE Power Budget: 
• 120 watts (PoE consumption + DC out and depending on power input)
• Max. Number of Class 2 PDs: 
• 4
• Max. Number of Class 3 PDs: 
• 4
• Max. Number of Class 4 PDs: 
• 4

Electrical Characteristics

• System Voltage Rating: 
• 24V DC
• Maximum Charging Current: 
• 6A
• Max. Solar Array VOC: 
• 60V DC
• Max. Operating Voltage:  
• 45V DC
• Total Current Consumption:
• While operating -32mA
• At idle -11mA
• High Temperature Shutdown:
• 100 degrees C disconnect solar and load
• 80 degrees C reconnect solar and load

Battery Charging Characteristics

• Charge Algorithm:
• Bulk charge (constant current), Absorption charge (constant voltage) and Floating charge. Absorption and Floating charge with PWM protection.
• Maximum Output Current: 
• 6A
• Nickel-cadmium Battery:
• ± 40 mV/degrees Celsius for NiCad type batteries; charge cut-off @ 55 degrees C
• (Temperature compensation baseline@ 25 degrees C)
• Lead Acid Battery (Default Setting):
• ± 60 mV/degrees Celsius for lead acid type batteries; charge cut-off @ 55 degrees C(Temperature compensation baseline@ 25 degrees C)
• Float Charge Voltage: 
• DC 27.2V (26.0~30.0V)
• Absorption Charge Voltage: 
• DC 29.2V (28.0~32.0V)
• LVD (Low Voltage Disconnection): 
• DC 22.2V (21.0~25.0V)
• LVR (Low Voltage Reconnection): 
• DC 24.8V (23.0~27.0V)

Router Features

• Internet Connection Type: 
• Shares data and Internet access with users, supporting the following internet accesses:
• PPPoE
• Dynamic IP
• Static IP
• PPTP
• L2TP

• Firewall:

• NAT firewall with SPI (Stateful Packet Inspection)
• Built-in NAT server supporting Port Forwarding, and DMZ
• Built-in firewall with IP address/MAC address/Port/ URL filtering
• Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter, DoS protection
• Routing Protocol: 
• Static/Dynamic (RIP1 and 2) routing
• VPN Pass-through: 
• PPTP, L2TP, IPSec, IPv6
• LAN: 
• Built-in DHCP server supporting static IP address distribution
• Supports UPnP, Dynamic DNS
• Supports IGMP Proxy
• Supports 802.1d STP (Spanning Tree)
• IP/MAC-based bandwidth control

Management

• Management Interface:
• Setup of system/management functions
• Web firmware upgrade
• SNMP trap for alarm notification of events
• PoE Management:
• Power limit by consumption and allocation
• PoE admin mode
• Per port power schedule
• Per port power enable/disable
• Power feeding priority
• Current per port usage and status
• Total power consumption
• PD alive check
• Scheduled power recycling
• Battery Management: 
• Battery current usage and status
• Battery capacity statistics
• Low Voltage Cut-Off Protection

Standards Conformance

• Regulatory Compliance:
• FCC Part 15 Class A, CE
• Standards Compliance:
• IEEE 802.3 10BASE-T Ethernet
• IEEE 802.3u 100BASE-TX Fast Ethernet
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet
• IEEE 802.3x Flow Control and Back Pressure
• IEEE 802.1D Spanning Tree Protocol
• IEEE 802.3af Power over Ethernet
• IEEE 802.3at Power over Ethernet Plus
• RFC 768: UDP
• RFC 791: IP
• RFC 2068 HTTP
• RFC 1157: SNMP v1
• RFC 1902: SNMP v2c
• RFC 5424: Syslog

Environment

• Operating:
• Temperature: -10 ~ 60 degrees C
• Relative Humidity: 5 ~ 95% (non-condensing)
• Storage:
• Temperature: -10 ~ 70 degrees C
• Relative Humidity: 5 ~ 95% (non-condensing)