High-performance protection

On Line Performance technology and the automatic voltage control make the E2 LCD an ideal protection solution for applications such as video surveillance, data storage, telephone switchboard, VOIP, etc.

In the event of a power cut, E2 LCD offers up to 60 mi. of backup time ensuring uninterrupted service or critical data backup

Smart Function

The built-in charger takes only 4 hours to reach maximum backup capacity.

When the UPS is not powered up, the cold startup function enables emergency starting of connected hardware.

When power is restored the UPS automatically starts up again and does nor requires any operator input.

Energy saving functions

If none of the loads connected are ON and the UPS switches to battery mode, the Green Energy Saver function stops the UPS automatically so as not to needless drain battery power.

The battery automatically recharges when there is mains power and theUPS is OFF. This function ensures that when connected devices are not in use and the UPS is OFF, the battery continues recharging. In addition, as the battery recharges twice as fast, this represents an energy saving of 50%!

Designed for ease of use

• A single On/Off switch.
• LCD screen and audible alarms indicating UPS status

General Specifications

• Technology: On Line Performance controlled by microprocessor
• Power: 800VA
• Power factor: 0,6V

• IEC outputs with backup time: 4

• Tel./ ADSL line Protection: RJ11 (1 IN / 1 OUT)

Protection & Filtering

• Output form: Pure Sinusoidal
• Protection: Discharge / overload / overvoltage + Tel./ADSL line
• Input Protection: Fuse
• Overvoltage Protection: Phase-Neutral protection: 1 kV; Phase-Ground & Neutral-Ground protection: 2 kV

Physical Characteristics

• Dimensions - HxWxD (mm): 145x100x330
• Net Weight: 6kg

Input Technical Characteristics

• Voltage: [110-120 VAC] or [220/230/240 VAC]
• Voltage range: [81-145 VAC] or [162-290 VAC]
• Frequency: 50/60 Hz (auto-detection)

Output Technical Characteristics

• Voltage: [110-120 VAC] or [220/230/240 VAC]
• Automatic Voltage regulation: ± 10%
• Frequency: 50 or 60 Hz ± 1Hz

Battery

• Battery Charger: Automatic battery charging upon connection to the mains
• Cold Startup (no main): Yes
• Battery type & number: 12V/9 Ah x 1
• Recharging time: 4-6 hours at 90% after total discharge
• Backup Time 1 pc load - 120W): 16 min.

Display

• LCD Screen: Mains power supply mode, battery mode, output charge level, battery level, input voltage, output voltage, overload, fault and battery low

Audible Alarm

• Battery Mode: Sound every 10sec.
• Low Battery Mode: Sound every sec.
• Overload: Sound every half sec.
• Battery replacement: Sound every 2sec.
• Fault: Continuous Sound

Communication

• USB port: 1
• RS232 port: -
• Communication Software: "InfoPower"

Environement

• Ideal environment: 0-40°C, 0-90% relative humidity (without condensation)
• Noise Level: < 40dB

Norms

• Standard: CE, RoHS
• Electromagnetic compatibility: EN 62040-2 / IEC 61000-4-2 / IEC 61000-4-3 / IEC 61000-4-4 / IEC 61000-4-5 / IEC 61000-2-2
• Low voltage safety: EN 62040-1-1 / IEC 60950-1