An advanced technology
Equipped with the On Line Double Conversion controlled by a microprocessor, the E4 LCD Evolution range delivers a perfect sinewave output current and provides thorough and effective protection of critical devices.
The output power factor is optimal, reaching 0.9, to provide high performance and efficiency for critical applications.

Smart features

• Cold start function: It enables an emergency situation involving a total power cut to be overcome by starting the UPS using batteries without the mains power supply.

• UPS controlled by a microprocessor: Among other advantages this control mode provides a wide range of input voltage (110 V to 300 V), an input power ratio of more than 95 %, little harmonic distortion and effective noise reduction.

• Energy saving ECO mode (1 to 3kVA versions): Efficiency of up to 97 % equates to energy and cost savings. In addition, a static bypass power supply via the UPS offers timely return to on-line double conversion if required.

• Emergency Power Off (EPO): This function ensures the safety of personnel and hardware in the event of fire or Networks & critical applications - Industrial Environments From 1 to 10k VA any other emergency situation by triggering the total and immediate shutdown of the UPS.

Practical design
UPS status is seen at a glance on an intuitive LCD screen. The UPS is controlled by a simple control panel on the front with 3 or 4 buttons: ON/OFF, operating mode configuration, voltage setting, programmable outlet setting…

Communication
USB or RS 232 communication ports and SNMP interface enable an E4 LCD UPS to communicate with the various stations and IT servers it is protecting. The multiple communications function should be noted: USB or RS232 ports can therefore operate simultaneously with the SNMP interface.

Features

GENERAL CHARACTERISTICS

Technology On Line Double Conversion
Power (VA) 10000VA
Power (W) 9000 W
Power factor 0,9

PHYSICAL CHARACTERISTICS

Standard:
- - Dim. DxWxH: 442X190X688mm
  - Net weight: 82 kg

TECHNICAL INPUT CHARACTERISTICS

Low voltage range:
- Low Line transfer (based on load percentage : 100%-80% / 80%-70% / 70%-60% / 60%-0%):
  - 110 VAC: +/- 3% at 50% load
  - 176 VAC: +/- 3% at 100% load
- Low Line comeback:
  - 120 VAC +/- 3% at 50% load
  - 186 VAC +/- 3% at 100% load
High voltage range:
- High Line transfer: (based on load percentage : 100%-80% / 80%- 70% / 70%-60% / 60%-0%) :
  - 300 VAC +/- 3%
- High Line comeback:
  - 290 VAC +/- 3%
Frequency range
- - 50 Hz : 46 Hz ~ 64 Hz
  - Power factor > 0,99 at 100% load

TECHNICAL OUTPUT CHARACTERISTICS

Voltage: 208 / 220 / 230 / 240 VAC
AC voltage regulation (Batt mode): +/- 1%
Frequency range (Synchronized range): 50 Hz : 50 Hz : 46 Hz ~ 54 Hz or 60 Hz : 56 Hz ~ 64 Hz
Frequency range (Batt mode): 50 Hz +/- 0,1 Hz or 60 Hz +/- 0,1 Hz
Current crest ration: 3:1 (max)
Harmonic distorsion: <= 3% THD (Linear Load); <= 6% THD (Non-linear Load)
Transfer time: Line mode to battery mode 0 ms Inverter to Bypass: 0 ms
Waveform: Pure sinewave
Output outlets IEC standards: 0
Output terminal block: no

EFFICIENCY

AC mode: 90%
Battery mode: 89%

BATTERY

Standard model:
- - Battery type: 12 V / 9 AH
  - Number: 20
  - Typical recharge time: 9 hours recover to 90% capacity
  - Charging current: 1A (max 2A)
  - Backup time: from 5 to 30 minutes depending on the connected load

DISPLAY

LCD screen: Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicator.

AUDIBLE ALARMS

Battery mode: Sounding every 4 seconds
Low battery: Sounding every second
Overload: Sounding twice every second
Fault: Continuously sounding

MANAGEMENT / COMMUNICATION

Communication: USB & RS232 port and Infopower included software (support Windows family, Linux, Unix and MAC)

ENVIRONMENT

Humidity: 0 - 95% relative humidity @ 0-40° non condensing
Operating Altitude: Up to 1000 m above sea level (> 1000 m 1% deterioration for every 100 m)
Noise level: Less than 58dBA @ 1meter
Heat dissipation: max - HV (230 V) 960 W / 3276,45 Btu/h

NORMS

Standard: CE RoHS, cTUVus
EMC (Electromagnetic compatibility): EN 62040-2 : 2006 ; EN 61000-2-2 : 2002; EN61000- 4-2 : 2009; EN61000-4-3:2006 +A1:2008 +A2:2010; EN61000-4-4:2004+A1:2010; EN61000-4-5:2006; EN61000-4-8:2010
Low voltage (Safety): EN62040-1 : 2008

Voor 14u bestellen = morgen thuis geleverd of vanaf morgen afhalen in de winkel*

*: de levertermijnen zijn indicaties & hangen af van leveranciers en transportfirmas