Netwerk: Routers & firewalls: TELTONIKA RUTX11 LTE CAT6 DUAL SIM ROUTER
TELTONIKA RUTX11 LTE CAT6 DUAL SIM ROUTER TELTONIKA RUTX11 LTE CAT6 DUAL SIM ROUTER TELTONIKA RUTX11 LTE CAT6 DUAL SIM ROUTER TELTONIKA RUTX11 LTE CAT6 DUAL SIM ROUTER TELTONIKA RUTX11 LTE CAT6 DUAL SIM ROUTER TELTONIKA RUTX11 LTE CAT6 DUAL SIM ROUTER
 
TELTONIKA RUTX11 LTE CAT6 DUAL SIM ROUTER
374,20-incl. BTW

Voor 17u bestellen, overmorgen thuis geleverd
Voor 17u bestellen, overmorgen afhalen

EAN: 4779027312378
MPN: RUTX11000000
Merk: TELTONIKA
Stock: 11

Toon volledige specificatiesVerberg volledige specificaties

Model: Teltonika RUTX11

INDUSTRIAL CELLULAR ROUTER

Features

  • RUTX11 is a very powerful device equipped with Dual-SIM with auto Failover, Backup WAN, and other SW features.
  • A wide range of internal hardware interfaces allows this product to be used in power-hungry industrial applications where speed and robustness are at the heart of the solution.
  • 4G LTE – Cat 6 DL up to 300 Mbps in sync with 4 x 1 Gbit Ethernet ports allows for a seamless data transfer experience with auto-failover and a backup WAN.
  • Bluetooth LE allows sensors to be connected directly to the router, thus minimizing the overall solution ecosystem.

Standard Package Contains

  • Router RUTX11
  • Euro PSU
  • 2 x LTE antennas (swivel, SMA male)
  • 2 x WiFi antennas (swivel, RP-SMA male)
  • 1 x GNSS antenna (adhesive, SMA Male)
  • 1 x Bluetooth antenna (magnetic, RP-SMA male)
  • Ethernet cable (1.5 m)
  • QSG (Quick Start Guide)
  • Packaging box

Specifications

MOBILE

  • Mobile module: 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
  • SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail
  • Status: Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply
  • USSD: Supports sending and reading Unstructured Supplementary Service Data messages
  • Black/White list: Operator black/white list
  • Multiple PDN: Possibility to use different PDNs for multiple network access and services
  • Band management: Band lock, Used band status display
  • APN: Auto APN
  • Bridge mode: Direct connection (bridge) between mobile ISP and device on LAN

WIRELESS

  • Wireless mode: 802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
  • WiFi security: WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
  • ESSID: ESSID stealth mode
  • Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

ETHERNET

  • WAN: 1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
  • LAN: 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

BLUETOOTH

  • Bluetooth 4.0: Bluetooth low energy (LE) for short range communication

NETWORK

  • Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
  • Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL), DLNA
  • VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring: Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall: Port forwards, traffic rules, custom rules
  • DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd
  • QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNS: Supported >25 service providers, others can be configured manually
  • Network backup: VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover
  • Load balancing: Balance Internet traffic over multiple WAN connections
  • SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)

SECURITY

  • Authetication: Pre-shared key, digital certificates, X.509 certificates
  • Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN: Port and tag based VLAN separation
  • Mobile quota control: Custom data limits for both SIM cards
  • WEB filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

  • OpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methods
  • OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
  • IPsec: IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
  • GRE: GRE tunnel
  • PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3 support
  • Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN: Method of building scalable IPsec VPNs
  • SSTP: SSTP client instance support
  • ZeroTier: ZeroTier VPN client support
  • WireGuard: WireGuard VPN client and server support

MODBUS
MODBUS TCP SLAVE

  • ID filtering: Respond to one ID in range [1;255] or any
  • Allow remote access: Allow access through WAN
  • Custom registers: Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality

MODBUS TCP MASTER

  • Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
  • Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

MQTT GATEWAY

  • Gateway: Allows sending commands and receiving data from Modbus Master trough MQTT broker

DATA TO SERVER

  • Protocols: HTTP(S), MQTT, Azure MQTT, Kinesis

MONITORING & MANAGEMENT

  • WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
  • FOTA: Firmware update from server, automatic notification
  • SSH: SSH (v1, v2)
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
  • Call: Reboot, Status, Mobile data on/off, Output on/off
  • TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  • MQTT: MQTT Broker, MQTT publisher
  • SNMP: SNMP (v1, v2, v3), SNMP trap
  • JSON-RPC: Management API over HTTP/HTTPS
  • Modbus: Modbus TCP status/control
  • RMS: Teltonika Remote Management System (RMS)

IoT PLATFORMS

  • Clouds of things: Allows monitoring of: Device data, Mobile data, Network info, Availability
  • ThingWorx: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
  • Cumulocity: Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
  • Azure IoT Hub: Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server

SYSTEM CHARACTERISTICS

  • CPU: Quad-core ARM Cortex A7, 717 MHz
  • RAM: 256 MB, DDR3
  • FLASH storage: 256 MB, SPI Flash

FIRMWARE / CONFIGURATION

  • WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
  • FOTA: Update FW/configuration from server
  • RMS: Update FW/configuration for multiple devices at once
  • Keep settings: Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

  • Operating system: RutOS (OpenWrt based Linux OS)
  • Supported languages: Busybox shell, Lua, C, C++
  • Development tools: SDK package with build environment provided

LOCATION TRACKING

  • GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
  • Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
  • NMEA: NMEA 0183
  • Server software: Supported server software: TAVL, RMS
  • Mobile Network Geolocation: Get approximate device location on RMS based on mobile cell tower position (without using GPS)
  • Geofencing: Configurable multiple geofence zones

USB

  • Data rate: USB 2.0
  • Applications: Samba share, USB-to-serial
  • External devices: Possibility to connect external HDD, flash drive, additional modem, printer
  • Storage formats: FAT, FAT32, NTFS

INPUT/OUTPUT

  • Input: 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
  • Output: 1 x Digital Output, Open collector output, max output 30 V, 300 mA
  • Events: SMS, Email, RMS

POWER

  • Connector: 4 pin industrial DC power socket
  • Input voltage range: 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
  • PoE (passive): Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
  • Power consumption: 16 W Max

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

  • Ethernet: 4 x RJ45 ports, 10/100/1000 Mbps
  • I/Os: 1 x Digital Input, 1 x Digital Output on 4 pin power connector
  • Status LEDs: 4 x WAN type LEDs, 2 x Mobile connection type, 5 x Mobile connection strength, 8 x LAN status, 1 x Power, 2 x 2.4G and 5G WiFi
  • SIM: 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
  • Power: 1 x 4 pin DC connector
  • Antennas: 2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNSS
  • USB: 1 x USB A port for external devices
  • Reset: Reboot/User default reset/Factory reset button
  • Other: 1 x Grounding screw

PHYSICAL SPECIFICATION

  • Casing material: Aluminium housing with DIN rail mounting option
  • Dimensions (W x H x D): 115 x 44.2 x 95.1 mm
  • Weight: 456 g
  • Mounting options: DIN rail, flat surface placement

OPERATING ENVIRONMENT

  • Operating temperature: -40 C to 75 C
  • Operating humidity: 10 % to 90 % non-condensing
  • Ingress Protection Rating: IP30

REGULATORY & TYPE APPROVALS

  • Regulatory & Type Approvals: CE/RED, RoHS, REACH
  • Vehicle: ECE R10 (E-mark)

EMI IMMUNITY

  • Standards: EN 55032:2015, EN 55035:2017, Draft ETSI EN 301 489-1 V2.2.1, ETSI EN 301 489-3 V2.1.1, Draft ETSI EN 301 489-17 V3.2.0
  • ESD: EN 61000-4-2:2009
  • RS: EN 61000-4-3:2006+A1:2008+A2:2010
  • EFT: EN 61000-4-4:2012
  • Surge protection: EN 61000-4-5:2014
  • CS: EN 61000-4-6:2014
  • DIP: EN 61000-4-11:2004

RF

  • Standards: ETSI EN 300 328 V2.1.1, ETSI EN 301 893 V2.1.1, ETSI EN 300 440 V2.1.1

SAFETY

  • Standards: IEC 62368-1:2014 (Second Edition) EN 62368-1:2014+A11:2017 EN 50385:2017 EN 62232:2017

Voor 17u bestellen = overmorgen thuis geleverd of overmorgen afhalen in de winkel*
*: de levertermijnen zijn indicaties & hangen af van leveranciers en transportfirmas

374.20 Gratis verzending vanaf € 50

 


RELATED PRODUCTS