10/100/1000Base-T to 1000Base-SX / LX Gigabit Media Converter
Offering the flexibility with all kinds of 10/100/1000Mbps Ethernet Media on RJ-45 port and performing highly stable Gigabit fiber capability, the PLANET Gigabit media converter series GT-80X (GT-802, GT-802S, GT-805A and GT-806A/B) supports conversion between 10/100/1000Base-T and 1000Base-LX/SX network. The GT-80X series offer three types of connector, SC / SFP / WDM connector, with single-mode or multi-mode media as required so that an Gigabit fiber network can be efficiently constructed through the Ethernet.
Designed in compact size, the GT-80X can be used as a standalone unit or being installed in the media converter chassis such as the PLANET MC-700/MC-1000R/MC-1500 ( 7/10/15-slot Media Converter Chassis to build a centralized fiber-optic network. The media chassis can feed GT-80X power to maintain the fiber-optic network at one location.
As the GT-80X series fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the installation of the Gigabit media conversion is quite quick and easy by simple plug and play. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packets loss. Even when the web UI is not available, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status and performance monitoring and troubleshooting.
Model GT-80x Series Standards IEEE 802.3, 10Base-T IEEE 802.3u, 100Base-TX IEEE 802.3ab, 1000Base-T IEEE 802.3z, 1000Base-SX / LX Ports 1 x 10/100/1000Base-T port 1 x 1000Base-SX / LX port Copper Interface RJ-45 port (Auto-MDI / MDI-X) Twisted Pair Optic Interface GT-802 : SC / Multi-mode GT-802S: SC / Single Mode GT-805A: SFP LC / vary on module GT-806A15: WDM SC / Single Mode GT-806B15: WDM SC / Single Mode GT-806A60: WDM SC / Single Mode GT-806B60: WDM SC / Single Mode Optic Wavelength GT-802: 850nm GT-802S: 1310nm GT-805A: Vary on SFP module GT-806A15: TX: 1310nm, RX: 1550nm GT-806B15: TX: 1550nm, RX: 1310nm GT-806A60: TX: 1310nm, RX: 1550nm GT-806B60: TX: 1550nm, RX: 1310nm Launch Power (dBm) Max. GT-802: -4 GT-802S: -3 GT-805A: N/A GT-806A15: -3 GT-806B15: +5 GT-806A60: -3 GT-806B60: +4 Launch Power(dBm) Min. GT-802: -9.5 GT-802S: -9.5 GT-805A: N/A GT-806A15: -9 GT-806B15: 0 GT-806A60: -9 GT-806B60: -1 Receive Sensitivity (dBm) GT-802: -13.5 GT-802S: -14.4 GT-805A: N/A GT-806A15: -21 GT-806B15: -25 GT-806A60: -21 GT-806B60: -25 Maximum Input power (dBm) GT-802: -18 GT-802S: -20 GT-805A: N/A GT-806A15: -3 GT-806B15: -3 GT-806A60: -2 GT-806B60: -2 Speed-Twisted-pair 10/20Mbps for Half / Full-Duplex 100/200Mbps for Half / Full-Duplex 2000Mbps for Full-Duplex Speed-Fiber-optic 2000Mbps for Full-Duplex Cable-Twisted-pair 10Base-T: 2-pair UTP Cat. 3, 4,5, up to 100m 100Base-TX: 2-pair UTP Cat. 5, up to 100m 1000Base-T: 4-pair STP Cat 5 up to 100m Cable-Fiber-optic cable • 50 / 125µm or 62.5 / 125µm multi-mode fiber cable, up to 220 / 550m • 9 / 125µm single-mode cable, provides long distance for 10 / 15 / 20 / 30 / 40 / 50 / 60 / 70 / 120km (very on fiber transceiver or SFP module) LED Indicators • PWR • TP LINK / ACT, 1000 • Fiber LINK / ACT OAM TS-1000 Jumbo Packet Size 9K Power Consumption 5.6 Watts / 19 BTU (maximum) Power Input DC 5V / 2A Dimension (W x D x H) 97 x 69 x 26 mm Operating Environment Temperature: 0~50 Degree C Humidity: 5~90% non-condensing Storage Environment Temperature: -40~70 Degree C Humidity: 5~90% non-condensing Emission FCC Class A, CE Class A